Coating process of Tricycle With Cabin

Coating is a necessary process for the production of Tricycle Motorcycle, and it plays an important role in the production of carports. So, what are the coating processes for carports?

1. Engraving roller coating method: This Tricycle With Cabin coating method is a combination of the scraper coating method and the roller coating method. The coating liquid attached to the convex part of the engraved drum with a concave and convex surface is scraped off by the scraper, and the concave part is The coating liquid is quantitatively transferred to the base fabric.
2. Lamination method: This Tricycle With Cabin coating method is to bond the film or other films rolled by rollers to the film material or base fabric. Generally, the surface of the base fabric is bonded or hot pressed. Combined processing.
3. Scraper coating method: This Tricycle With Cabin coating method uses a scraper to apply a certain amount of coating liquid on the base cloth. The thickness of the coating is adjusted by the gap between the scraper and the base cloth. This method can also Can process thin materials. Moreover, this method can be used to coat the front and back sides of the membrane material with coatings of different materials.
4. Roller coating method: This Tricycle With Cabin coating method uses several rollers to transfer the coating liquid to the base fabric while applying it.
5. Roller method: Use a heated roller to roll the coating liquid into a film, and then combine the coating film with the base fabric through several rollers. This method can be used to process thicker Tricycle With Cabin coatings, and the coating thickness can be adjusted more accurately.