Convenient operation of Tricycle Motorcycle

Energy and environmental protection has always been an important reason for people to choose and favor. However, in use, the light weight and instability of the Tricycle Motorcycle have always been a headache for people. In the field of Tricycle Motorcycle, especially a kind of light Gasoline Tricycle, if you want to improve its loading capacity, you can use this technical solution - including a main frame body and a single double wheel distributed on the main frame body and Drive mechanism assembly, driver seat, pedal drive assembly, handlebar steering assembly, brake assembly and power supply circuit control system assembly.

Since the utility model is changed from the structure to the front double rear single wheel distribution structure, the front box is realized to carry articles and personnel, which is convenient for drivers and passengers to take care of each other and take care of the carried articles in time. It can be said that through the improvement of this structure, the application value of the Gasoline Tricycle can be effectively further improved, so that its application status can be further affirmed. Because the front wheels of the electric vehicle have a double front wheel structure, the two front wheels are fixed by an independent front chassis, the upper part of the chassis is provided with a box groove, and the middle part of the chassis is fixed with a beam, which is connected to the front beam of the main frame body through a vertical shaft. Fixed, the lower end of the steering rod in the handlebar steering assembly is connected to the steering connecting rod, and the steering connecting rod is connected to the chassis through the steering knuckle between the three connecting rods.
Due to the regular and rigorous operation of the raw materials and ingredients of the product, the most prominent feature of this canopy product is that the color is quite bright. In addition, because the product has been finished in the mold, it will be demoulded after drying. After the product is demoulded, the blank will be cut off with a cutting machine, and then the edge of the product will be smoothed with sandpaper, so as to ensure that the edge of the product is neat and clean. . The appearance of convenient new Tricycle Motorcycle has brought some changes to our lives and provided convenience for our lives, but while using them, we must support traffic management and pay attention to safety. The manufacturer of the Tricycle Motorcycle canopy adopts formal and correct mold making materials, carries out cumbersome mold grinding procedures, careful mold polishing operations, and careful mold waxing processes, making the surface brightness of the canopy products very high after production. .