Electric Heavy-duty Tricycle self-installation instructions

Now, there are many merchants selling Electric Heavy-duty Tricycle on the market, but the styles are relatively simple. Therefore, in order to stand out, some friends go to the Tricycle Motorcycle manufacturer to buy materials and install them by themselves. So, what problems should be paid attention to when installing a Tricycle Motorcycle by yourself?

1. Calibration inspection After the suspension arm is installed, first check the quality of the on-site connection parts. The installation quality of the suspension arm mainly checks the non-verticality of the vertical surface of the suspension arm. The slope of the suspension arm on the vertical surface of the suspension arm when the Electric Heavy-Duty Tricycle is pressed.
2. Pay attention to the installation of laminated glass on Electric Heavy-duty Tricycle. Determine the glass size according to the design requirements and the measured size, install stainless steel glass claws, and adjust the glass after temporary fixation. The adjustment standard is horizontal, vertical, and flat, and the deviation must not exceed the specified deviation.
In addition, the self-installation of Electric Heavy-duty Tricycle also requires special attention when applying glue. The gaps between the glass should be fully cleaned, and there should be no water, paint, dust, etc. The bonding surface should be fully cleaned and dried.