How to prevent sideslip when riding an Electric Tricycle in winter

Cycling becomes especially dangerous when winter arrives, with both bikes and electric vehicles at risk several times higher than usual. In order to prevent sideslip when riding an Electric Tricycle in winter, the following measures can be taken:

1. Prepare anti-skid equipment Before driving, you should prepare anti-skid equipment such as shovels, picks, and triangular wood. For safety reasons, you can also set up anti-skid chains to avoid side slipping. In addition, driving on ice and snow roads requires concentration, careful driving, invention of the environment and early handling of penalties.
2. Stable start-up Because the adhesion force on the surface of ice and snow is very small, the driving wheel is easy to slip and idle. Therefore, at the beginning, the clutch should be kept in the state, and the throttle should be moderate, so that the engine will not burn under the premise of relatively small output power, in order to reduce the torque of the driving wheel to meet the relatively small adhesion, and avoid starting to slip.
3. Speed control The speed should be controlled according to the road conditions, vehicle skill status and own skill proficiency. Usually, the medium speed is better.
4. Pay attention to the unity of speed in the cycle progress, not fast or slow.
5. Pay attention to the choice of driving route, reduce the speed of the vehicle, and slowly build up the deviation to avoid such a sharp side slip, relatively large slope and long lateral slope after the part, should clear the car with high snow, or dig the wheels with the same width, so that the groove behind the wheel is smooth.
6. Applying the brakes When braking, the initiative should be gentle. The Tricycle Motorcycle manufacturer suggests that our usual practice is to step on the brake pedal slowly. When you feel the map is slightly forward, keep the position of the pedal or raise it a little to eliminate the forward inertial force of the vehicle. Emergency braking cannot be applied after cutting off.