How to quickly install an Tricycle With Cabin

Tricycle Motorcycle have the advantages of keeping warm, avoiding cold and shading. Therefore, it is particularly important to install a suitable carport on an Tricycle With Cabin. Moreover, as long as the installation is carried out according to the following five steps, there will be no problem.

1. Welding of stainless steel glass claw device: pop up the vertical and horizontal lines and design elevation according to the design size of the Tricycle With Cabin, clamp it with a clamp, perform positioning spot welding, and after the assembly is completed, weld the glass claw base.
2. Laminated glass processing and manufacturing equipment: According to the design requirements, the actual measured size is determined to determine the glass size, as well as the horizontal and vertical position, and the manufacturer processes and manufactures it. Install stainless steel glass claws, and adjust after the glass is temporarily fixed. The adjustment standards are horizontal, vertical, and flat.
3. Anti-rust spraying treatment for Tricycle Motorcycle: Slag and splashes should be removed, and the surface of stainless steel parts should be sprayed with white paint multiple times for anti-rust spraying treatment. The thickness of paint and paint film should comply with the design requirements or construction standards.
4. Glue up and down: Clean the gaps between the glass thoroughly. There should be no water, oil stains, paint, rust, cement mortar, dust, etc. Thoroughly clean the bonding surface and dry it. To adjust the depth of the seam and prevent gluing on three sides. Apply protective tape on both sides of the seam to protect the glass from contamination. Apply sealant to the top and bottom at the same time. After the glue is injected, smooth the surface of the glue joint and remove the excess glue.
5. Tricycle With Cabin adjustment and inspection: The point glass is adjusted and inspected as a whole, and the adjustment standards are horizontal, vertical, and flat.