How to troubleshoot Tricycle With Cabin

The clutch of the Tricycle With Cabin cannot be separated clearly. Reason: The clutch pedal stroke of the Tricycle With Cabin is too large or too small; the compression stroke of the separation lever is not enough or the three separation levers are not in the same plane. Troubleshooting method: In the former case, the free stroke of the clutch lever of the Tricycle With Cabin should be adjusted to 30-50 mm; in the latter case, the clearance (0.2-0.4 mm) between the three release levers and the release bearing plane should be adjusted to be the same, that is, in the same plane.

Difficulty changing gears or not being able to shift into gear. Reasons: The clutch of the Tricycle With Cabin is not clearly separated; the joint position of the shift lever and the tie rod is wrong, the fork is not in place, and the shift lever and the pin are desoldered. Troubleshooting method: The clutch of the Tricycle With Cabin is not clearly separated, and the clutch of the Tricycle With Cabin must be adjusted; if the pull-out fork is not in place, the position of the joint of the shift lever and the tie rod should be adjusted so that the pull-out fork is in place.
Automatically disengage. Reasons: The spring force of the fork is insufficient; the gear is not in place; the positioning groove of the fork shaft is worn. Troubleshooting method: The gear is not in place. The tie rod joint needs to be adjusted to make the fork in place. If the positioning groove is worn, the fork shaft can be rotated 90 degrees.
Brake failure. Reasons: Inconsistent braking force; serious wear of the brake shoes; too loose brake lever. Troubleshooting method: If the braking force is inconsistent, the brake rod nut needs to be adjusted; if the brake rod is too loose, the free travel of the brake rod needs to be adjusted to within 20-30 mm.
The V-belt is slipping. Reasons: ① The V-belt is too loose; ② The V-belt is severely worn; ③ There is oil on the surface of the V-belt or pulley. Troubleshooting method: If the V-belt is too loose, move the diesel engine forward and tighten the machine corner screws, or adjust the towing pulley. To tighten the V-belt, apply about 2 kilograms of force with your thumb at the midpoint of the tight span. The belt should sink 8-12 mm. If the V-belt is severely worn, it should be replaced. If there is oil on the surface of the V-belt or pulley, wipe it with a dry cloth. .
V-belt twist. Reason: The two pulleys are not aligned. Troubleshooting method: Adjust the position of the diesel engine to align the two pulleys.
The clutch of the Tricycle With Cabin is slipping. Reason: The friction plate is stained with oil and the friction plate is severely worn; the elastic force of the compression spring becomes weak or broken. Troubleshooting method: If the friction plate is stained with oil, the Tricycle With Cabin clutch should be disassembled, washed with gasoline and dried. If the spring force becomes weak or broken, the separation lever should be adjusted and a new spring should be replaced.