The rapid development and methods of Tricycle Motorcycle

Tricycle Motorcycle are developing rapidly in my country because of their moderate price, the use of clean electric energy, environmental protection and energy saving, and the advantages of easy operation and the like. The emergence of Tricycle Motorcycle has sprung up one after another, and the Tricycle Motorcycle has developed from a traditional tricycle with a single function of transporting goods to an electric sightseeing car, an electric ATV, an old-age scooter, and an electric drawing car. In the past two years, there have also appeared Electric four-wheel vehicles similar to cars and the like.

Generally, the transmission mode of the Electric Tricycle is divided into two types: fork type variable speed transmission and chain type transmission. First of all, the fork type variable speed transmission is a fork type variable speed transmission system directly driven by the wheels. The structure adopts a straight fork type. It consists of two overspeed separators on the left and right, each of which can be tightly combined with the wheel hub to rotate. Two left and right spiral clutches are installed on the hollow shaft. These two screw clutches push the clutch through the hollow shaft direct pin. The screw clutch of the Tricycle Motorcycle can promote the coaxial overspeed separator to make it push the gear wheel to drive the motor to rotate together. The hollow shaft end is equipped with a planetary gear transmission mechanism, and the overspeed separator adopts a mechanism combining throwing blocks and grooved rollers. Secondly, it is the chain transmission of the Gasoline Tricycle. This transmission is a transmission method that transmits the motion and power of the driving sprocket with a special tooth shape to the driven sprocket with a special tooth shape through the chain.
Gasoline Tricycle chain transmission has many advantages. Compared with belt transmission, there will be no elastic sliding and slipping phenomenon. The average transmission is accurate, the transmission power is large, the overload capacity is strong, the work is reliable, the efficiency is high, and the transmission size is small under the same working conditions. The required tension is small, the pressure acting on the shaft is small, and it can work in harsh environments such as humidity, dust, high temperature, high temperature, and pollution. The most suitable transmission method for a Gasoline Tricycle should be the transmission of the chain. It can rotate with great force, and the structural performance of the chain is also very good, which meets the requirements of transmission strength and vehicle body.