The Tricycle Motorcycle compartment can be divided into two types according to the unloading method: backward tilting type and side tilting type.

The structure of the engine, chassis and driver's seat of a Special Tricycle is similar to that of a general truck, but slightly different. According to the unloading method, the Special Tricycle compartment can be divided into two types: backward tilting type and side tilting type. The shapes of the carriages are flat, three-door and U-shaped.

The Special Tricycle controls the movement of the piston rod through the control system, and can realize backward tipping, sideways tipping and two-way tipping. The engine drives the hydraulic pump through the gearbox and power take-off. The hydraulic tilting mechanism of the trolley is composed of a fuel tank, a hydraulic pump, a distribution valve, a lifting hydraulic cylinder, a control valve and oil pipes. During the unloading process, the Special Tricycle controls the movement of the piston rod through the control system, which can make the carriage stop at the required inclined position for easy unloading. After unloading, the Special Tricycle resets by its own weight and hydraulic control.
It is easy to learn to drive a Special Tricycle, but you must also abide by the operating specifications of the Special Tricycle, so that your Tricycle Motorcycle can have a longer service life. Before driving the vehicle, check the locking device and lock the hopper so as not to fall off during driving. Keep balance when starting, start slowly, accelerate slowly, and keep the vehicle running smoothly.