What is the maintenance content of the Hydraulic Dumping Tricycle?

Tricycle Motorcycle maintenance includes checking whether all the screws and nuts of the whole vehicle are firm, whether the control performance is good, whether the tires need to be replaced, whether the mechanical system is in good condition, whether the battery capacity of the Hydraulic Dumping Tricycle meets the standard, and the brushed motor is maintained once a year . The specific maintenance content is as follows:

(1) Fully debug the whole vehicle, check whether there is any potential failure in the electrical control circuit, and whether the electrical connection line of the Hydraulic Dumping Tricycle is damaged, and if so, it should be eliminated on the spot;
(2) Adjust the front and rear brakes to ensure that the brakes are flexible and reliable;
(3) Whether the steering of the handlebar is reliable, and whether there is a phenomenon that the handlebar and the front fork slide against each other;
(4) Regularly check the battery of the Hydraulic Dumping Tricycle (once a month in summer, and once every 2-3 months in winter) to see if the liquid level of the battery is below the marking line. If the plate is exposed, distilled water should be replenished in time. (Be careful not to add acid, because the electrolyte concentration of each Hydraulic Dumping Tricycle battery has been adjusted according to the ratio when it comes out of the tricycle manufacturer. Adding acid will destroy the existing pH balance, cause plate corrosion, and affect hydraulic self-unloading. Unload the life of the tricycle battery.
(5) Pay attention to add gear oil to the rear axle gearbox when using it for the first time, and then regularly check the rear axle gearbox for oil leakage, damaged gaskets, and lack of lubricating oil, replace the gaskets in time, and replenish lubricating oil.
(6) Lubricating oil is added to the gearbox, motor sprocket and chain regularly. If the wear is serious, it should be replaced in time to avoid affecting the use.
(7) Tighten the bolts of the whole vehicle regularly to check whether they are loose or falling off, and apply anti-rust liquid appropriately to avoid difficulties in maintenance due to rust on the screws.
(8) The whole vehicle is cleaned and wiped clean.