What matters need to be paid attention to when installing Special Tricycle?

With the development of technology, various means of transportation have appeared in our lives. The ancient ox-carts and horse-drawn carriages have been replaced by modern means of transportation. Various objects, large and small, appear in our lives and work.

Tricycle Motorcycle are a commonly used means of transportation and transportation. We all know that the triangle has stability, so the stability of Tricycle Motorcycle is generally better than that of two-wheeled vehicles, and it is very suitable for the elderly to travel. In addition, when we walk on the road, most of us will find that the Tricycle Motorcycle on the road are basically equipped with Special Tricycle, which can not only protect us from wind and rain, but also better provide us with a Space for pulling goods.
Therefore, in order to help everyone better use and understand Special Tricycle, the editor will first explain some specific matters that need to be paid attention to during the installation of the carport.
1. It is necessary to calibrate and inspect the suspension arm. After installation, the quality of the on-site connection part must be reduced first. The suspension arm mainly checks its verticality.
2. For the laminated glass of Special Tricycle, the size of the glass should be determined according to the design requirements and the actual measured size, and stainless steel glass claws should be installed. The glass should be adjusted after temporary fixation. Adjust the standard balance, verticality, and surface level. The deviation should not exceed the specified deviation.
3. Installation and processing of embedded parts of Special Tricycle: The embedded parts are required to be drilled and installed, with accurate position and firm burial. The elevation deviation shall not be greater than 9mm, and the left and right shall be less than 20mm.
4. Anti-rust spray paint treatment for the carport: Slag and splashes should be removed, and the surface of the stainless steel parts should be sprayed with white paint multiple times for anti-rust spray paint treatment. The thickness of paint and paint film should comply with the design requirements or construction standards.