What should be done when charging a Tricycle Motorcycle?

In order to extend the life of the mine, it is necessary to carry out necessary daily maintenance work, which not only saves time and effort personal money, but also reduces the overall fixed costs. Therefore, routine maintenance work is essential. Let's take a look at the mining Tricycle Motorcycle and hand over the daily maintenance work you need to do. Proper daily maintenance and upkeep of Tricycle Motorcycle not only facilitates safe riding, but also extends the life of the Tricycle Motorcycle.

1. Before using a Tricycle Motorcycle, you should pay attention to check whether the vehicle is in good condition, such as whether the tire pressure is sufficient, whether the front and rear brakes are sensitive, whether there are any abnormal noises in the vehicle, whether the screws are loose, and whether the battery is fully charged.
2. When the vehicle just starts, accelerate slowly to avoid sudden rapid acceleration that may damage electrical components. In order to extend the life of the battery and motor. Twist the speed control handle or pedal during riding, and do not accelerate sharply when going on bridges, uphill slopes, against winds or with heavy loads to avoid impact damage to the battery and affect the battery's mileage and service life.
3. Under the premise of ensuring safety, frequent braking and starting should be minimized while driving to save electric energy. When braking while driving, the speed control handle should be loosened to avoid damage to the motor and other parts. When you get off the car and push, you should turn off the power to prevent accidents caused by accidentally turning the speed control handle and the car suddenly starting.
4. When charging, please be careful not to use other brands of chargers. The performance of each brand of charger matches the battery. Only a dedicated charger can achieve the best charging effect.
5. The charger contains high-voltage circuits. Do not disassemble it without authorization. When charging, do not cover the charger with anything and place it in a ventilated place. At the same time, pay attention to prevent liquid and metal particles from entering the charger, and prevent falling and impact, which may cause damage.
6. Do not cause accidental damage to the electric bicycle. For example, do not allow water to flood the motor center and controller. Turn off the switch immediately after getting off the bicycle. Avoid storing it in a high-humidity or corrosive environment. The brakes should be appropriately tight.
When a Tricycle Motorcycle is being charged, the charging may not be safe due to improper operation or use. Therefore, it is necessary to avoid such problems when charging.