How to make a Gasoline Tricycle

There is a carport side beam on each side of the Gasoline Tricycle. Each carport side beam is welded with three 7*75*100 angle steels, with the middle one being 7620 cm long, the two ends being 7450 cm long, and the other being 4790 cm long. The wide side plane of the carport side beam angle steel is on the top, and the narrow side plane is close to the outside of the vehicle body. The side columns and corner columns are riveted to the bottom of the carport side beam, and the carport purlins are riveted to the top. Two rivets are used at each end to rivet the end of the carport outer end beam.

There are two carport inner end beams in the whole vehicle, both made of 8*255*3000 steel plates. There are carport inner end beams and carport side beam angle steels at both ends, which are riveted to the carport side beams with four rivets. The inner surface of the carport inner end beam is riveted with the end column and the rear part of the shed column, and the outside is riveted with the corner column diagonal brace and shed column support.

There are two carport outer end beams in the whole carport, both made of 4*50*50*2634 angle steel. The end is embedded in one side of the carport outer end beam and welded. The lower part of the carport outer end beam is connected to the carport column through the carport outer end beam column angle steel. One rivet is used on each of the upper parts to directly rivet with the six through-platform ceiling middle beams.