How to replace the inner tube of a Tricycle Motorcycle?

Tricycle Motorcycle have a wide range of applications. It is suitable for transporting aerated bricks, cement and building materials at construction sites; it is also an ideal transport for enterprises such as brick kilns. High power, flexible and lightweight, large load capacity.

When using Tricycle Motorcycle at construction sites, we will always encounter tire punctures. So, how should we replace the inner tubes of Tricycle Motorcycle when we encounter tire punctures?
Removing the outer tire and inner tube of a Tricycle Motorcycle is a technical task, and the outer tire and inner tube can be easily and smoothly removed; for inexperienced people, it is often laborious and easy to damage the tire, especially the inner tube.
Use the valve core tensioner to remove the valve core to maximize the internal tire release.
Step the edge of the outer tire where the tire is to be installed into the groove, and then use two tire levers to push the edge of the outer tire upward. Protect the inner tube carefully.
Be careful not to reach the valve core.
When the side openings of the outer tire are all separated, take out the inner tube. Be careful not to move the outer tire. Take out the valve door until all the side openings are removed.
Precautions:
If there is no special pry bar, you can use the handle of a adjustable spanner instead. Never use a screwdriver as this can easily prevent the inner tube from rotting.
Deflating the inner tube and stepping on the outer tire into the groove are critical steps.
Features of Tricycle Motorcycle:
1. Environmentally friendly, zero emissions, energy saving and low consumption.
2. Simple operation and maintenance, no training required.
3. Large load capacity and wide application range. It is an ideal means of transportation for construction sites, brick kiln factories and other enterprises.
4. High power and low requirements on road conditions.