How to solve the problem of Tricycle Motorcycle?

When the cold idling jitter and hot idling jitter of a Tricycle Motorcycle exist at the same time, the hot idling jitter must be eliminated first. When judging whether it is vibration, you should observe whether the engine speed meter pointer of the Electric Tricycle shakes, or read the engine speed in the module. The engine pad of the Electric Tricycle is damaged, especially the Electric Tricycle.

1. Mechanical failure of the Tricycle Motorcycle`s engine. For example, the pressure in each cylinder is uneven
2. Failure of the air intake system, such as air leakage in the air intake pipe, etc. Excessive carbon accumulation on the intake valve and intake pipe, excessive dirt on the inner wall of the throttle valve and intake pipe, etc.
3. The engine management system of the Tricycle Motorcycle failed. For example, incorrect water temperature and suction temperature signals, line failure, etc.
4. The ignition system is faulty. For example, excessive carbon accumulation in the spark plug, incorrect gap, leakage of high-voltage wires, distributor cover, damaged ignition coil, etc.
5. Refueling system failure. For example, if the injection oil contains too much carbon due to the colloid inside the nozzle, the nozzle cannot be closed or is clogged.
A cold car accelerates poorly. According to the user manuals of many Tricycle Motorcycle manufacturers, a cold car can start without preheating. However, a Tricycle Motorcycle can start by preheating for about 3 to 5 minutes after starting the engine. Mechanical wear and tear, small-capacity vehicles can reduce engine power when starting. Starting with a large accelerator when cold is a wrong driving method. The accelerating vehicle that appears at this time can be avoided. Tricycle Motorcycle can cause vehicle failure by starting with a slow refueling when cold.