How to use a Tricycle Motorcycle charger?

Speaking of Tricycle Motorcycle, everyone is familiar with them. Tricycle Motorcycle are a relatively popular vehicle these days. Tricycle Motorcycle are powered by batteries and driven by motors, and there is no vibration. It can work for about 10 hours on a single charge. It has strong climbing ability and can continue to operate on uneven roads. It is very suitable for use on construction sites and is green and environmentally friendly. This car has a beautiful and smart appearance, a reasonable and compact body structure, and adopts control combination components, making it convenient and flexible to operate, stable, reliable and reliable.

Tricycle Motorcycle use electric energy, and the charger is indispensable. Next, I will introduce how to use the Tricycle Motorcycle charger:
1. When charging, first insert the charging plug of the charger into the charging socket of the battery car. At this time, the battery indicator light is on. Then, connect the power plug of the Tricycle Motorcycle to ~220V mains power, then turn on the current switch, the power indicator light is on, and the ammeter Shown.
2. When the Tricycle Motorcycle is charging, when the charging indicator light is on (the full indicator light is only for reference), it means that the battery capacity has reached about 80%, and the ammeter indication value is reduced or close to zero. At this time, please continue to keep the battery low. Current charging takes 2-3 hours to fully charge.
3. Fast charging. When charging is urgently needed in a short time, the charging current should not exceed 18A (it is recommended not to use high current charging for a long time, otherwise it will shorten the life of the charger and battery).
4. Method to adjust the charging current: When the mains power is stable at around 220V, first charge with a low current for 1-2 hours (select gear 1-2), then adjust the current to a normal value until it is fully charged (the normal value is such as a 120Ah battery , the charging current should be about 12A). When adjusting the current, you should observe the indication value of the ammeter to avoid the charging current being too large or too small.