Incorrect use of Tricycle Motorcycle charger for charging

1. Regardless of the discharge depth of the Tricycle Motorcycle, the discharge termination voltage is over-discharged, and repeated over-discharges will cause the active material on the negative to fall off. Bend metal plates and damage gratings.

2. The Tricycle Motorcycle charger is not used correctly. It will be used if it is charged with a high current according to the battery specification or if the charging capacity is insufficient. When overcharging, the positive and negative active materials will be impacted by the gas, causing the active materials to fall off, resulting in a decrease in battery capacity and a shortened service life.
3. The capacity and active material utilization of the Tricycle Motorcycle warm battery increase with the increase of temperature, which is mainly caused by changes in the properties of the electrolyte. One is that due to the decrease in temperature, the viscosity of the electrolyte increases, so that the movement of ions is greatly resisted, the diffusion ability decreases, and the active material cannot be used due to the lack of it, resulting in a decrease in capacity. Secondly, the electrolyte resistance increases as the temperature decreases. As a result, the internal resistance of the battery increases, and the capacity decreases as the voltage drop increases.