Use and maintenance of Tricycle With Cabin batteries

The battery life of Tricycle Motorcycle has a great relationship with usage habits. Lead-acid batteries have no memory, so the rapid decrease in capacity is mainly caused by battery vulcanization, water loss, power loss and other reasons. The most feared thing about batteries is loss of power and voltage. Batteries often lose power and battery plates are easily injured. In reality, up to 70% of Tricycle With Cabin battery capacity reduction is caused by the electrode plate being strained by the strong current during discharge. Electrode plate strain is a physical damage to the battery, and this damage cannot be repaired. Therefore, it is inevitable to use the car every day and charge it every day to ensure that the battery has sufficient voltage at all times.

Users generally believe that maintenance-free batteries do not need to be filled with water. In fact, this statement is wrong. Maintenance-free batteries will generate heat during charging and high-current discharge. When there is heat, water will evaporate. Although the process of water evaporation is very slow, the cumulative amount of water evaporation cannot be underestimated over time. Therefore, the battery should be replenished with water every 6 months or so, so that the service life of the battery will be extended. The starting current of Tricycle Motorcycle is very large, especially the electric motorcycles with high-power motors, which have even greater starting current. Large currents can damage the battery plates. The best way is to ride like a bicycle before starting the Tricycle With Cabin. Of course, many electric motorcycles do not have riding devices, so there is no solution.
After the battery is used for a period of time, some active materials will inevitably sink. If the active materials are not activated in time, it will inevitably have some impact on the capacity of the battery. Therefore, when using Tricycle Motorcycle frequently, it is necessary to perform a quarterly inspection of the battery. Deep discharge once. In addition, the charging process of a new battery usually takes 6-8 hours. After it is fully charged, the charger will light up green. If the charging time is too long, check whether the charger's voltage protection device is damaged. If it is damaged, the charger needs to be replaced in time. , otherwise it is very easy to charge the battery. In addition, do not buy a fast charger. Fast charging will also damage the battery plates. When the battery is not used for a long time, it is necessary to charge the battery at least once a month. The purpose of this is to prevent the battery from being left for too long, which may cause vulcanization and loss of power. Prevent the battery from being exposed to the sun. Exposure to the sun will increase the temperature of the battery, so be careful. Use battery protector as early as possible. Battery protector is also a pulse generator. Because the pulse continuously eliminates battery vulcanization and keeps the plates clean, it can extend the service life of the battery. However, it has little effect on damaging the battery plates due to high current. .