What are the manufacturing processes of Gasoline Tricycle?

September 10, 2024

The technology of the manufacturing process of Gasoline Tricycle is one of the processes in the manufacturing process of products. In this technology, we have designers to make corresponding plans based on the shape and size required by users. Draw the drawings first, and then the technicians will operate them.

Construction site A3 three wheeled motorcycle

The first is the width of the membrane material: when dividing the plane grid in the process of shape finding and analysis, the width of the membrane material must be considered. Try to make the membrane units included in a piece of membrane cloth intact, otherwise the position of the boundary points of the membrane block can be determined through interpolation calculation.

The second is the surface curvature: if the curvature of adjacent units is very different, then it must be explained that the surface is severely distorted at this position. If the cutting seam is not cut off and restarted here, then the boundary of the cutting membrane block will have a large arc here. From the change trend of the curvature of adjacent units, the general direction of the geodesic can be judged.

Author:

Mr. Liu

E-mail:

liuyang@cqzonlon.com

Phone/WhatsApp:

+8613608399736

Popular Products

Company News