What should I pay attention to when buying a Gasoline Tricycle?

1. Look at the frame of the Tricycle Motorcycle. Gasoline Tricycle manufacturers share that we cannot blindly think that the thick frame pipe is of good quality. The key to the quality of the frame is the thickness of the pipe. The pipes used in a good frame are generally of moderate thickness, but the thickness will be much thicker than the frame that looks thicker on the outside.

There are holes drilled at the bottom of a good quality frame, which is to facilitate the outflow of liquid during pickling and phosphating. Through the holes, you can see the thickness of the pipe wall. Inferior frames are not pickled and phosphated, have no holes, are prone to rust, and deliberately close the ports so that people cannot see the thickness of the pipe wall. High-quality frames have thin walls and light weight, and the weight difference between them and inferior frames can reach more than 20 kilograms.

The quality of the frame is related to the safety, stability and life of the vehicle. Inferior frames are prone to breakage and safety accidents. So be careful.

2. Look at the shock absorption system.

It can be judged by two points, the front fork sleeve shock absorption and the rear plate shock absorption.

Front fork sleeve shock absorber: The quality can be judged by appearance. High-quality front fork sleeve shock absorber is hydraulic shock absorber, the inner tube is multi-level chrome-plated, the surface is bright and smooth; the outer tube is finely polished aluminum. Mid-range front fork sleeve shock absorber is generally also hydraulic shock absorber, but the chrome plating level is low, the appearance is worse, the color is dull, and it is easy to rust, and the oil seal is easy to leak oil. Inferior front fork sleeve shock absorber is basically dry shock absorber, iron outer tube, some have outer, no hydraulic damping function, so there are often abnormal noises, and after about a year of use, the outer tube will rust and lose the shock absorption function.

Rear plate shock absorber: The number of high-quality plates is four to five, and the width and thickness are increased. Inferior plates are generally three pieces, and the width is narrow. Some inferior products, in order to fool people, say that they use double plates, but in fact they are useless. The shock absorption system is much more important for Tricycle Motorcycle than two-wheeled vehicles, because Gasoline Tricycle Motorcycle have a larger load and the road conditions are worse. The quality of the shock absorption system is extremely important to the comfort and stability of Tricycle Motorcycle.

3. Look at the details.

Details determine whether the product is a fine product. Especially for Tricycle Motorcycle with hundreds of parts. Screws are small parts that are used more frequently. The quality can be distinguished by color. High-quality screws are silver and green; low-quality screws are yellow and white. In addition, things like front mud tiles, plastic parts, lamps and instruments, car locks, hinges, battery compartments, pressure plates, etc. should be carefully checked.

4. Look at the wiring harness of the whole vehicle. Tricycle Motorcycle are driven by electricity and have complex vehicle circuits. High-quality wiring harnesses have thick cores and reasonable layout design; low-quality wiring harnesses have hard cores and impure materials, which are easy to corrode and rust, and the insulating materials are easy to age and crack, which makes it more likely to have circuit failures.